arrow_upward

Pages (19): Jump to page 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
NanoKVM | Free NAT KVM | Multiple Locations
#71
@rudra As Refuge said, always send a email.

Monitoring is running on this machine, I did detect no issues as far as I can tell, otherwise I would have known the issue.
But I will check it later, in detail.
#72
Thanks guys. From now on, I will.

But i guess Neoon wont mind if i also post about those problems in a separate thread here. That might help me or someone else someday.

I wonder if this is somehow related to faults in memory/storage.
cause this happened.

root@Debian8:~# apt update
Hit:2 http://security.debian.org stretch/updates InRelease
Ign:1 http://cdn-fastly.deb.debian.org/debian stretch InRelease
Hit:3 http://cdn-fastly.deb.debian.org/debian stretch-updates InRelease
Hit:4 http://cdn-fastly.deb.debian.org/debian stretch Release
Reading package lists... Error!
E: Encountered a section with no Package: header
E: Problem with MergeList /var/lib/apt/lists/security.debian.org_dists_stretch_updates_contrib_i18n_Translation-en
E: The package lists or status file could not be parsed or opened.
root@Debian8:~# apt update
Hit:1 http://security.debian.org stretch/updates InRelease
Ign:2 http://cdn-fastly.deb.debian.org/debian stretch InRelease
Hit:3 http://cdn-fastly.deb.debian.org/debian stretch-updates InRelease
Hit:4 http://cdn-fastly.deb.debian.org/debian stretch Release
Reading package lists... Done
Building dependency tree
Reading state information... Done
All packages are up to date.
Sincere Thanks to VirMach for my VPS9. Also many thanks to Shadow Hosting and cubedata for the experiences I had with their VPSs.
#73
@rudra

rm -r /var/lib/apt/lists/*
and
apt-get clean && apt-get update

Doesn't work at all?

Tried a different mirror for the package sources?
[Image: zHHqO5Q.png]
#74
Regarding LT, I found issues with the memory, the memory will get replaced.
Hopefully everything runs stable now again.

@rudra thanks for letting me know.
If you still have issues after the replacement, lemme know.

edit: @rudra Please check your VM again, if you face still the issue, maybe replaced to the sata issue we had, so I would need to reinstall it.
#75
@Hidden Refuge
thank you. yes, sources file edited multiple times and kept bare minimum really good urls. I kept deleting those lists and recreating dpkg status file. It was segment fault, read error, corrupt deb package, decompression error etc and not always triggered at the same point or by the same activity. thats why i thought of faulty memory or storage.

i also thought of lack of storage or messed up permission. but that was not it. cause /boot had enough space as well as / and single packages were getting installed ok sometimes.

I succeeded at dist-upgrade after multiple trials and only after installing gcc 6 manually. then i cleaned cache and /boot.

@Neoon
Many thanks. It is ok now. I promise I will.
Sincere Thanks to VirMach for my VPS9. Also many thanks to Shadow Hosting and cubedata for the experiences I had with their VPSs.
#76
Nuremberg, Germany, is live, was a bit different since time, since everything now runs slabbed inside a bigger KVM.

Specs:
CPU 1x Intel® Core™ i9-9900K
Memory: up to 1GB
Storage: 10GB NVMe (Raid 1, capped at 450MB/s)
Uplink: 75Mbit (unmetered FairUse)
IPv6: /80 is available

Everyone who is still on Finland will be contacted in the next days for the migration.
Additional, everyone who has a KVM on Kaunas, is invited for a migration, since the problems continue and it does not look solvable.
#77
i need a simply personal page,
Token: 6c54851e732482e458b676864716b0cd741f528a
#78
(07-19-2019, 10:16 PM)allenby Wrote: i need a simply personal page,
Token: 6c54851e732482e458b676864716b0cd741f528a
Not to underestimate your capability, but if you apply because it's free VPS and doesn't know very much, I suggest you read from the first to last post. It only has IPv6 and a NAT IP, which mean you're going to have more set up your VPS.

On the other hand, you also don't meet the requirement:
Quote:The Requirements to get one
- Existing account since 4 months, here on post4vps
- Active account (you need to have a decent amount of recent posts)
- You need to have 50 posts before you apply
- Active usage of the KVM
You don't meet requirements number 1, 2, and 3. We don't know about number 4 :p.
Anyway, continue to post here, 25 posts + 100 points is enough to get VPS from here. You have 10 days more to complete P4V requirements.
Thanks to Limitless Hosting and Post4VPS for providing me excellent VPS 13!
#79
HAProxy support has been now Deployed on all Locations, including Port 80 forwarding and Port 443 TLS passthrough.
Which means your TLS connection wont be terminated by HAProxy just forwarded to your VM.

You can add the Records inside the NanoKVM Panel, it takes up to 60 minutes before the rules go into affect.
#80
my token : 1da8f5abd35769201f5738c7c169a6779ea8922d
i want to use this vps for personal use like hosting websites ,game servers !
thank you post4vps and  racknerd for wonderful vps3  Heart
 
Pages (19): Jump to page 


Possibly Related Threads…
Thread
Author
Replies
Views
Last Post
12,633
12-14-2021, 07:35 AM
Last Post: sagher
12,243
05-31-2020, 04:41 PM
Last Post: TimeRider

person_pin_circle Users browsing this thread: 1 Guest(s)
Sponsors: VirMach - Host4Fun - CubeData - Evolution-Host - HostDare - Hyper Expert - Shadow Hosting - Bladenode - Hostlease - RackNerd - ReadyDedis - Limitless Hosting